MILWAUKEE WINTER CUT LEVEL C GLOVES Work Gloves - Water Resistant
Description
Milwaukee Winter Cut Level C Water-Resistant Work Gloves
Keep your hands warm and protected during cold-weather work with Milwaukee Winter Cut Level C Gloves. A double-dipped latex coating covers three-quarters of the palm to improve water resistance in wet conditions, while a warm acrylic terry lining provides insulation. Designed to remain comfortable during extended wear, these gloves also offer certified cut and cold resistance.
Key Features
- Improved water resistance: Double-dipped latex covers three-quarters of the palm.
- Winter warmth: Acrylic terry lining helps keep hands warm in cold conditions.
- Cut protection: EN 388 cut-resistance rating of C.
- Extended-wear comfort: Designed to remain comfortable over long periods of use.
- Pack contents: One pair of gloves.
Certification
EN ISO 21420:2020 covers general requirements for protective gloves, including design, comfort and harmlessness. The product information also references EN 420, an earlier general-requirements standard.
EN 388:2016 (2442C) rates protection against mechanical risks:
- Abrasion resistance (2): Withstands at least 500 abrasion cycles; rated from 1 to 4.
- Blade cut resistance (4): Achieves level 4 in the coupe test; rated from 1 to 5.
- Tear resistance (4): Withstands a tearing force of at least 75 N; rated from 1 to 4.
- Puncture resistance (2): Withstands a puncture force of at least 60 N; rated from 1 to 4.
- ISO cut resistance (C): Withstands a straight-blade cutting force of at least 10 N; rated from A to F.
EN 511 (02X) rates protection against cold:
- Convective cold (0): Rated 0 on a scale from 0 to 4; no convective-cold performance level was achieved.
- Contact cold (2): Rated 2 on a scale from 0 to 4 for resistance to cold transferred through contact.
- Water penetration (X): No water-penetration rating is reported under this standard; X means not tested or not applicable.
Specifications Table
| Glove type | Cut-resistant and cold-resistant work gloves |
|---|---|
| Material | Acrylic and latex |
| Lining | Warm acrylic terry |
| Coating | Double-dipped latex covering three-quarters of the palm |
| Cut level | C |
| Gauge | 15.7 stitches per inch |
| Pack quantity | 1 pair |
| Available sizes | S, M, L, XL, XXL |
| Country of origin | China |
| Standards | EN ISO 21420:2020; EN 388:2016 (2442C); EN 511 (02X) |
Instructions and Care
- Do not wear near rotating machine parts, such as saw blades or drills, due to entanglement risk. If the tear level is 1 or higher, do not use near moving machinery.
- Designed to minimise risks associated with general handling; the gloves do not protect against chemicals, handling hot or cold objects, or very sharp objects striking the hands with great force or speed.
- Store in the original packaging in clean, covered and ventilated premises under normal temperature and humidity conditions.
- Storage temperature: -5°C to 35°C. Storage humidity: 20% to 75%.
- The gloves can be used out of the packaging for up to 5 years after the production date printed on the glove. Service life depends on wear and abrasion.
Specifications
Shipping & returns
Shipping in 1-4 days. Free return in 30 days. Exact shipping details are shown at checkout.
