MILWAUKEE BOLT™ 200 UNVENTED Safety Helmet - 440 V Electrical Insulation
€119,94€99,12 excl. VAT
€99,12 excl. VAT for business →
EN 397 (Industrial safety helmets)
Description
MILWAUKEE BOLT 200 Unvented Electrical Insulation Safety Helmet
Built for demanding worksites, the MILWAUKEE BOLT 200 combines an ultra impact-resistant Lexan polycarbonate shell with a foam insert that helps distribute impact. Its dial-adjustable fit, interior headband and sweatband provide comfort across a 52–68 cm head circumference range. The unvented design is certified to EN 397:2012, including optional requirements for electrical insulation at 440 V a.c., lateral deformation and temperatures down to −40°C. The BOLT™ attachment system makes it easy to fit compatible accessories.
Key Features
- Impact-resistant shell: Lexan polycarbonate construction with a matte finish.
- Adjustable comfort: Dial adjustment, an interior foam insert and a headband support a comfortable fit.
- Replaceable comfort components: Breathable, washable sweatband and headband.
- BOLT™ system: Easy, intuitive attachment system compatible with a wide range of BOLT™ accessories.
- Unvented design: Supplied with a fitted, grey-coded EN 397-certified chinstrap.
- Fit and colours: Fits head circumferences of 52–68 cm; available in black, blue, green, high-visibility yellow, orange, red, white and yellow.
Certification
- EN 397:2012: Certified to the industrial safety helmet standard.
- Extreme temperature (−40°C): Meets the EN 397 optional requirement for performance at temperatures down to −40°C.
- Lateral deformation (LD): Meets the EN 397 optional requirement for resistance to sideways compression.
- Electrical insulation (440 V a.c.): Meets the EN 397 optional electrical insulation requirement rated at 440 V a.c.
- EN 50365, clause 5.3: The unvented version complies with this clause for electrically insulating helmets used on low-voltage installations.
- EN 12492:2012: The unvented version offers protection in accordance with this standard except for clause 4.1.4; it is not described as fully certified to EN 12492.
Specifications Table
| Collection | Helmet |
|---|---|
| Head protection type | Industrial safety helmet |
| Shell material | Polycarbonate (Lexan) |
| Adjustment | Ratchet dial |
| Ventilation | Non-ventilated |
| Helmet features | Sweatband; foam insert; BOLT™ accessory attachment system |
| Head circumference | 52–68 cm |
| Size | One size |
| Colours | Black, blue, green, high-visibility yellow, orange, red, white and yellow |
| Gender | Unisex |
| Seasonality | All-season |
| Standard | EN 397:2012 |
| Optional EN 397 requirements | Electrical insulation (440 V a.c.); lateral deformation (LD); extreme temperature (−40°C) |
| Flame retardant | No |
| Chemical resistant | No |
| High-visibility classification | No |
| Country of origin | United States |
| Shelf life | 10 years from manufacture or 5 years from first use, whichever comes first |
Instructions and Care
- Before and after each use, check the shell, suspension and headband for breaks, cracks, crazing, discolouration or any other unusual condition.
- If any of these conditions are present, replace the helmet immediately; they may indicate reduced protection against impacts, penetration and/or electric shocks.
- Transport the helmet in packaging robust enough to prevent accidental damage to the shell or harness.
- Store it in an appropriate storage bag and/or closed cabinet to avoid prolonged exposure to sunlight, cold, humidity, exhaust gases and similar conditions.
- Storage temperature: +5°C to +35°C.
- Storage humidity: Below 85%.
Specifications
Certification
EN 397 (Industrial safety helmets)
Sizes
One Size – One Size
Season
All-Season
Shipping & returns
Shipping in 1-4 days. Free return in 30 days. Exact shipping details are shown at checkout.
MILWAUKEE BOLT™ 200 UNVENTED Safety Helmet - 440 V Electrical Insulation
€119,94€99,12 excl. VAT
